Rubber Dam Liquid 1.2 ml

Description

Properties of RUBBER-DAM LIQUID:

•  New quality of work
•  Perfect protection of soft tissues
•  Wide range of use

Method of use:

For gingiva protection during dental treatments:

Prepare Gingiva:

Clean and dry the gingiva thoroughly.

Use Appropriate Instruments:

Utilize buccal and labial retractors to immobilize lips and tongue, preventing contact with the liquid.

Prepare Syringe:

Remove the syringe lock and install the disposable applicator provided.

Apply Rubber-Dam Liquid:

Apply along the gingiva, ensuring a 4-6 mm width and approximately 1.5-2 mm thickness.
Monitor the amount applied, and if possible, squeeze through interdental spaces.

Curing Process:

Cure the preparation with a polymerization lamp for 20-30 seconds (refer to Pic.1 and Pic.2).
Conduct the curing process evenly in a scanning motion.

Dental Treatment:

Proceed with the planned dental treatment.

Removal of Polymerized Liquid:

After completing the treatment, lift off polymerized Rubber-Dam Liquid using the instrument on either side. Remove any residue for a clean finish.

In order to seal rubber dam:

Isolate the working area (tooth, teeth, alveolus) using RUBBER-DAM. In order to seal rubber dam, apply the layer of the liquid on the edge of the gingiva and the rubber dam (Pic.3, Pic.5). Cure the preparation for 20-30 seconds using a polymerization lamp. Conduct the curing process evenly in a scanning motion (Pic.4, Pic.6). Then, proceed the dental treatment. After the treatment is completed, lift off polymerized RUBBER-DAM LIQUID using the instrument on either side and remove.

Immediately after the use withdraw the syringe plunger and place the original cap on the container to avoid polymerization of the product in the syringe. The product is intended for reusing, while the applicator is designed for disposable use. Reusing the applicator may cause the hazard of re-infection.